ACFGT=ACFGT_0, ACREN=ACREN_0, ADCO=ADCO_0, ACFE=ACFE_0, DMAEN=DMAEN_0, AVGE=AVGE_0, ADACKEN=ADACKEN_0
General control register
| ADACKEN | Asynchronous clock output enable 0 (ADACKEN_0): Asynchronous clock output disabled; Asynchronous clock only enabled if selected by ADICLK and a conversion is active. 1 (ADACKEN_1): Asynchronous clock and clock output enabled regardless of the state of the ADC |
| DMAEN | DMA Enable 0 (DMAEN_0): DMA disabled (default) 1 (DMAEN_1): DMA enabled |
| ACREN | Compare Function Range Enable 0 (ACREN_0): Range function disabled. Only the compare value 1 of ADC_CV register (CV1) is compared. 1 (ACREN_1): Range function enabled. Both compare values of ADC_CV registers (CV1 and CV2) are compared. |
| ACFGT | Compare Function Greater Than Enable 0 (ACFGT_0): Configures “Less Than Threshold, Outside Range Not Inclusive and Inside Range Not Inclusive” functionality based on the values placed in the ADC_CV register. 1 (ACFGT_1): Configures “Greater Than Or Equal To Threshold, Outside Range Inclusive and Inside Range Inclusive” functionality based on the values placed in the ADC_CV registers. |
| ACFE | Compare Function Enable 0 (ACFE_0): Compare function disabled 1 (ACFE_1): Compare function enabled |
| AVGE | Hardware average enable 0 (AVGE_0): Hardware average function disabled 1 (AVGE_1): Hardware average function enabled |
| ADCO | Continuous Conversion Enable 0 (ADCO_0): One conversion or one set of conversions if the hardware average function is enabled (AVGE=1) after initiating a conversion. 1 (ADCO_1): Continuous conversions or sets of conversions if the hardware average function is enabled (AVGE=1) after initiating a conversion. |
| CAL | Calibration |